Welcome to our range of Safety Switches for Automation; a range of products for controlling and monitoring guards opening and looking in three different applications – Heavy Duty, Medium Duty and Compact Locations.
Heavy Duty Safety Switches are for use where robustness and strength is paramount and for protecting heavy machinery in dusty, dirty environments. Heavy Duty Locking actuators have a head retention force of 10,000N and can be used in systems up to Performance Level e.
Medium Duty Safety Switches are for use with lightweight machinery. Medium Duty Locking actuators have a head retention force of 2,500N and can be used in systems up to Performance Level d.
Compact Switches are perfect for space limiting, short radius applications, up to Performance Level e. Compact Locking actuators have a head retention force of 8,000N and are high-coded to minimise system defeat.
Ağır Hizmet
EI2A6EKR2LR411LVETP6P700NT04226F200MPB1
Left Handed Single Action Escape Release Handle
✔ Robust Design
✔ Integrates Restart Prevention
✔ Integrated Escape Release
✔ Guard Locking up to Cat. 4 PLe
✔ Operator Controls with Emergency Stop
✔ Pre-Wired M23 connector
✔ Easy to Install with just two fixings
Aksesuar -lar
Key CLK-SUSS
Bu ürün bir anahtar gerektirir (ayrı satılır)
Cable CABLE-5M-F2
5 meter (16.4ft) cable to suit M23 19-pin connector
EI4A6EKR2LR411LVETP6P700NT04226F200MPB1
Sağ El Tek Eylem Kaçış Serbest Bırakma Tutamacı
✔ Robust Design
✔ Integrates Restart Prevention
✔ Integrated Escape Release
✔ Guard Locking up to Cat. 4 PLe
✔ Operator Controls with Emergency Stop
✔ Pre-Wired M23 connector
✔ Easy to Install with just two fixings
Ağlı Ağır Hizmet Kilitleri PROFIsafe & CIP Safety
PROFINET/PROFIsafe enable for direct communication to logic controller.
⬜ Up to three dual channel safety components
⬜ Integrate additional I/O with no additional cabling
⬜ Connect external I/O with a unique configured design with a Fortress specialist
What External I/O? Do you have a light curtain, enabling switch, indicator light or sensor you wish to connect over PROFINET/PROFIsafe?
Our specialists are here to help.
EI2A6EKR2LR411LVETP6P700NT04226F200MPB1
Left Handed Single Action Escape Release Handle
✔ Robust Design
✔ PROFINET with PROFIsafe
✔ Integrated Restart Prevention
✔ Integrated Escape Release
✔ Guard Locking up to Cat. 4 PLe
✔ Operator Controls with Emergency Stop
✔ Easy to Install with just two fixings
EI4A6EKR2LR411LVETP6P700NT04226F200MPB1
Sağ El Tek Eylem Kaçış Serbest Bırakma Tutamacı
✔ Robust Design
✔ PROFINET with PROFIsafe Connection
✔ Integrated Restart Prevention
✔ Integrated Escape Release
✔ Guard Locking up to Cat. 4 PLe
✔ Operator Controls with Emergency Stop
✔ Easy to Install with just two fixings
EtherNet/IP & CIP Safety mantık denetleyicisine doğrudan iletişim için etkinleştirildi.
🟦 Up to three dual channel safety components
🟦 Integrate additional I/O with no additional cabling
🟦 Connect external I/O with a unique configured design with a Fortress specialist
What External I/O? Do you have a light curtain, enabling switch, indicator light or sensor you wish to connect over EtherNet/IP & CIP Safety?
Our specialists are here to help.
EI2A6EKR2SRP11NHEIP6P72NPF10MPB1
Left Handed Single Action Escape Release Handle
✔ Robust Design
✔ EtherNet/IP with CIP Safety Connection
✔ Integrated Restart Prevention
✔ Integrated Escape Release
✔ Guard Locking up to Cat. 4 PLe
✔ Operator Controls with Emergency Stop
✔ Easy to Install with just two fixings
EI4A6EKR2SRP11NHEIP6P72NPF10MPB1
Sağ El Tek Eylem Kaçış Serbest Bırakma Tutamacı
✔ Robust Design
✔ EtherNet/IP with CIP Safety Connection
✔ Integrated Restart Prevention
✔ Integrated Escape Release
✔ Guard Locking up to Cat. 4 PLe
✔ Operator Controls with Emergency Stop
✔ Easy to Install with just two fixings
Aksesuar -lar
Key CLK-SUSS
Bu ürün bir anahtar gerektirir (ayrı satılır)
Cabling from a logic controller to an interlock;
Cable Set CABLE-10M-PF10-H
(includes M12 5-pin to free ends, and D-coded 4-pin to RJ45)
Cascading cabling between interlocks;
Cable Set CABLE-10M-PF10-D
(includes 1*M12 5-pin dual ended and 1* dual ended D-coded 4-pin)
Connection
PF10 Bağlayıcı Kümesi
2*M12 D-Coded 4-pin Data + 2* M12 A-Coded 5-pin Power (M/F)
Tak ve çalıştır konektörleri ile ağa bağlı cihazların kurulumu hızlı ve basittir
Dual independent normally closed safety contacts;
✔ Applications up to Cat. 4, PLe
Koruma Kilitlemede Güvenlik
✔ Powering solenoid opens safety contacts
✔ Local indication of guard lock status through yellow LED
✔ Signaled non-safe monitoring of lock status
✔ Opening of guard only permissible through extraction of key
✔ Removal of restart prevention key monitored
✔ Whilst key is removed, safety contacts cannot be closed
Anahtarla Çalışan Anahtar
Key Operated Switch – Why?
🛑 Requesting machine stop at end of a run-down cycle
🖥️ Enabling teach mode activation
⛔ Prevent unexpected restart when key removed and taken into a safeguarded space
Why Fortress?
Robust metal alloy enclosed key switch with pre-wired M12 connection and mounting with just two fixings for easily installation. Suitable for applications up to Cat. 4 PLe, this product is designed for indoor or outdoor IP67 installations. Dust cover lock protection ensures reliable operation.
BK02T03543D700MPB1
Anahtar Kaldırma'da açık güvenlik kontakları
“Where can this key be used?”
Click on the image to view trapped key solutions
Aksesuar -lar
Key CLK-SUSS
This product requires one key to operate
CABLE-5M-D7
5 metre cable M12 connection to free wires.
Orta Ağır Hizmet
Medium Duty Safety Switch
THHSMQ3
Medium Duty Safety Switch with Fixed Handle for Hinged Guard Applications where monitored access is required. Door Hinges to the Left or Right of the Unit.
The Actuator has a 4mm misalignment tolerance for resilience against guard adjustment.
Safety Switches have 2NC safety contacts and 1NO monitoring contact with localised LED indication on the device.
This product is pre-wired to an M12 8-Pin disconnect and is compatible to any CABLE-XM-TQ3 variants where ‘X’ is length in metres.
Medium Duty Safety Switch with Ergonomic Handle for Hinged Guard Applications where monitored access is required. Door Hinges to the Left of the Unit.
The Actuator has a 4mm misalignment tolerance for resilience against guard adjustment.
Safety Switches have 2NC safety contacts and 1NO monitoring contact with localised LED indication on the device.
This product is pre-wired to an M12 8-Pin disconnect and is compatible to any CABLE-XM-TQ3 variants where ‘X’ is length in metres.
THNSMQ3
THSSMQ3
Medium Duty Safety Switch with Fixed Handle for Sliding Door Guard Applications where monitored access is required. Door Hinges to the Left of the Unit.
The Actuator has a 4mm misalignment tolerance for resilience against guard adjustment.
Safety Switches have 2NC safety contacts and 1NO monitoring contact with localised LED indication on the device.
This product is pre-wired to an M12 8-Pin disconnect and is compatible to any CABLE-XM-TQ3 variants where ‘X’ is length in metres.
Temel Özellikler
Medium Duty Guard Locks
Medium Duty Guard Lock with Fixed Handle for Hinged Guard Applications where controlled access is required via a Power-to-Unlock Solenoid. Door Hinges to the Left or Right of the Unit.
The Actuator has a 4mm misalignment tolerance for resilience against guard adjustment.
Guard locks have two pairs of 2NC safety contacts and monitoring contacts on both the guard opening (via Red LED), and for the guard locking (via Green LED).
This product is pre-wired to an M12 12-Pin disconnect and is compatible to any CABLE-XM-TQM variants where ‘X’ is length in metres.
THHSMDUQM
THNSMDUQM
Medium Duty Guard Lock with Ergonomic Handle for Hinged Guard Applications where controlled access is required via a Power-to-Unlock Solenoid. Door Hinges to the Left of the Unit.
The Actuator has a 4mm misalignment tolerance for resilience against guard adjustment.
Guard locks have two pairs of 2NC safety contacts and monitoring contacts on both the guard opening (via Red LED), and for the guard locking (via Green LED).
This product is pre-wired to an M12 12-Pin disconnect and is compatible to any CABLE-XM-TQM variants where ‘X’ is length in metres.
Medium Duty Guard Lock with Fixed Handle for Sliding Door Applications where controlled access is required via a Power-to-Unlock Solenoid. Door Hinges to the Left of the Unit.
The Actuator has a 4mm misalignment tolerance for resilience against guard adjustment.
Guard locks have two pairs of 2NC safety contacts and monitoring contacts on both the guard opening (via Red LED), and for the guard locking (via Green LED).
This product is pre-wired to an M12 12-Pin disconnect and is compatible to any CABLE-XM-TQM variants where ‘X’ is length in metres.
THSSMDUQM
Temel Özellikler
Compact
Compact Safety Switches: NCS-11SSR-A
Compact Stainless Steel Magnetic Safety Switch with 2NC contacts and local monitoring on the device.
This product is pre-wired to an M12 8-Pin disconnect and is compatible with any CABLE-XM-NCS variants where “X” is the cable length in metres.
Temel Özellikler
Compact Safety Switches: FRNK-21-DC-LQD
Compact Robust ABS RFID Safety Switch with 2NC contacts and local monitoring on the device.
This product is pre-wired to an M12 8-Pin disconnect and is compatible with any CABLE-XM-NCS variants where ‘X’ is the cable length in metres.
Temel Özellikler
Compact Guard Locks
Medium Duty Guard Lock: ATM-100A1-A
Compact Guard Lock with High-coded RFID Technology and safety on guard locking in applications where controlled access is required via a Power-to-Unlock Solenoid and where installation are limited on hinge radius or mounting space.
This product comes with one 5-Pin M12 disconnect and is compatible with any CABLE-XM-AT1 where ‘X’ is the cable length in metres.
Medium Duty Guard Lock: ATM-100A2-A
Compact Guard Lock with High-coded RFID Technology and safety on guard locking in applications where controlled access is required via a Power-to-Unlock Solenoid and where installation are limited on hinge radius or mounting space.
This product comes with two 5-Pin M12 disconnects which enable this product to be cascade-able. This product is compatible with cables CABLE-XM-ATD & CABLE-XM-AT1 where ‘X’ is the cable length in metres. Cables ending in ATD are for use between ATOM devices as part of the cascade. Cables ending in AT1 are for free ends to 5-Pin connector.
Medium Duty Guard Lock: ATM-100A3-A
Compact Guard Lock with High-coded RFID Technology and safety on guard locking in applications where controlled access is required via a Power-to-Unlock Solenoid and where installation are limited on hinge radius or mounting space.
This product comes with one 8-Pin M12 disconnect and is compatible with any CABLE-XM-AT3 where ‘X’ is the cable length in metres.
Temel Özellikler
Otomasyon için güvenlik çözümleri sağlama konusunda uzmanız
Makine emniyet uygulamalarınız için özel rehberlik ve çözümler için bizimle iletişime geçin.
