How easy is it to install a Heavy Duty Interlock?

 

 

Installing products to guarding can be laborious and time consuming. Reduce installation time and costs with the heavy duty mounting plate range designed for max robustness to safeguard your hazardous space and just two fixings per plate.

Mounting Plates to Reduce Installation

Mounting solutions come in a range of lengths for a variety of configurations and are designed for easy and simple fitting to machine guarding.

 

 

Plates are die cast aluminium and are suitable for both hinged and sliding guards.

Plates can be pre-fitted to your interlock/actuator when ordered together, or ordered separately if required.

 

 

Reduce Electrical Installation with Pre-wiring

 

 

 

 

The heavy duty range can be wired to a variety of M12 and M23 connectors to accommodate customer specifications. M12 solutions are offered in 5,8,10, and 12 pin, and M23 connectors in 12 or 19 pin.

Pre-wiring your interlock can shave significant time off of the electrical system integration, turning a time consuming wiring task into plug and play for a fraction of the cost. Electrical installation time and componentry can be significantly reduced for interlocking systems with the use of networked technology such as EtherNet/IP and PROFINET.

 

A market trends towards this technology in the manufacturing and automation sector has dramatically increased capability at the point of operation, from integrated button controls, emergency stop, and distributed I/O to external safe and non-safe devices such as light curtains, sensors, indicator lights, and enabling switches. All of this on a single M12 industrial data cable.

 

Internal Release Extension Kit (REX-KIT)

The REX-KIT is an extension to be used in conjunction with amGardpro Escape Release modules R2, R4, R7, R9,
RX, and RZ for extending escape release functionality through fencing up to 300mm.

Click Below for an Installation Guide

Hardwired Product Cables

 

Cables are available for standard connections in lengths of 5m, 10m, and 20m

 

 

 

Cable to suit M12 5-pin connector (D1)

CABLE-5M-D1 (5 metre cable)

CABLE-10M-D1 (10 metre cable)

CABLE-20M-D1 (20 metre cable)

 

 

 

Cable to suit M12 8-pin connector (D3)

CABLE-5M-D3 (5 metre cable)

CABLE-10M-D3 (10 metre cable)

CABLE-20M-D3 (20 metre cable)

 

 

 

Cable to suit M12 10 and 12-pin connector (D7 & D8)

CABLE-5M-D8 (5 metre cable)

CABLE-10M-D8 (10 metre cable)

CABLE-20M-D8 (20 metre cable)

Networked Product Cables

 

PF07 cable sets (for star-type topologies) are available for standard network connector sets of lengths 5m, 10m, and 20m. Cable sets include one M12 5-pin Power cable to free ends and one D-coded M12 4-pin Industrial Ethernet cable to RJ45 connection.

 

 

 

 

 

Cable to suit PF07 connector set (PF07)

CABLE-5M-PF07-H (5 metre cable)

CABLE-10M-PF07-H (10 metre cable)

CABLE-20M-PF07-H (20 metre cable)

PF10 cable sets (for linear or ring style topologies) are available for standard network connector sets of lengths 5m, 10m, and 20m. Daisy-chainable devices come with two different connector sets ‘H’ for Homerun and ‘D’ for Daisy-chainable. The connector set H provides two cables.

 

 

 

Homerun ‘H’ style cable sets include one M12 5-pin Female Power cable to free ends and one D-coded Male M12 4-pin Industrial Ethernet cable to RJ45 connection. Cable to suit PF10 connector set – Home Run ‘H’ (PF10).  Connecting your logic control to a networked device.

 

 

CABLE-5M-PF10-H (5 metre cable)

CABLE-10M-PF10-H (10 metre cable)

CABLE-20M-PF10-H (20 metre cable)

 

Daisy-chainable ‘D’ style cable sets include one M12 5-pin Male to Female Power cable and one D-coded, Male to Male 4-pin cable. Cable to suit PF10 connector set – Daisy-chain devices ‘D’ (PF10). Connecting your logic control to a networked device.

 

 

 

CABLE-5M-PF10-D (5 metre cable)

CABLE-10M-PF10-D (10 metre cable)

CABLE-20M-PF10-D (20 metre cable)