Entry Looper in Steel Processing
During the galvanization process of steel, metal rolls pass through the accumulator (entry looper). This section spans multiple levels and regulates the flow and tension of the steel strips, ensuring a continuous and controlled feed. Personnel regularly need access to this area for specific tasks.
La sfida
Previously, fixed guards were used, which operators would remove when access was required. This practice often resulted in damaged guards and exposed operators to hazards if the guards were not re-bolted properly. Hence, the customer upgraded to movable guards that require interlocks. In addition, due to the vast size of the area, running cables across multiple levels also presents challenges.
La soluzione
mGard
Fortress proposed a trapped key system with mGard mechanical interlocks. A key-operated switch is used to isolate power to the machine. The transfer of the key to the key exchange device releases the access keys that allow opening the respective interlocks on the upper levels. The machine can restart only when the sequence is reversed.
Interblocco meccanico
Isolamento dell'energia pericolosa
chiave del personale
Multi-person access
Come funziona
Processo passo-passo
Ulteriori considerazioni
Questa soluzione ha risolto con successo una sfida per un cliente specifico. Fortress è in grado di gestire configurazioni alternative e/o opzioni multi-range. Condividete con noi i dettagli della vostra applicazione, così potremo progettare una soluzione su misura per soddisfare le vostre esigenze.
Gamma di prodotti raccomandati
Why Mechanical Trapped Key?
In this application, a mechanical trapped key system based on the mGard range was chosen for a few reasons:
It enforces a sequence of events
While the key is removed, the energy source is prevented from being accidently turned on
It ensures that guards are closed before operations are allowed to resume
Another advantage of this solution is that by using mechanical interlocks it is possible to reach areas where wiring is impractical.
